Mudroom Bench

It’s been a while since I last talked about my desire to update our mudroom. It’s always seemed a little, well, blah. Honestly, with all of the other rooms calling for my attention, the mudroom has been one of my last concerns. But, boy, I’m ready to get a few wanted projects under my belt.

A mudroom bench was my biggest priority. Especially since we use the mudroom the most. It is, after all, connected to our garage and our main entrance into the house.

We needed a place to sit down and put on our shoes. We needed somewhere to set down a bag. Or a drop zone for the mail (temporarily).

I had been searching for a reasonably priced bench. I almost pulled the trigger on one once or twice. Something kept holding me back. Maybe it was the price or maybe it was because I’d rather spend that money on something else… who knows. I could also have a sixth sense and know that a free bench was coming my way.

Any one of those options works for me.

One day I stumbled upon this:

It was in rough shape. And dirty. Eww. But I could see the potential.

First, I gave it a few coats of white spray paint.

Then I started on the seat upholstery and followed the same steps as I did with my upholstered thrift store chair.

From there I attached the seat to the bench frame with a couple of screws and I was done!

Best part? It was FREE! No kidding. I spent money a while back on the fabric, but I’ve had it for about a year. With that sort of time frame I’m definitely going to call it free.

I’m happy to check that off the to do list.  Here’s what’s left:

1. Add storage bench below coat rack/ frame.

2. Upholster bench cushion or recover existing with fun fabric.

3. Add wire baskets for hats & things.

4. Add art/ pictures to coat rack frame.

5. Accessories, Accessories, Accessories!

6. Paint mudroom/ garage door.

7. Install non slip backing under current rug.

I just love checking things off of a list. It’s so empowering!

Big Smiles!

Advertisements

Upholstered Thrift Store Chair

You’ve already seen the “After” version of my lovely thrift store chair, but I can’t even begin to tell you how much I have fallen in love with it. What started out as a sad little chair ended up being one of my favorite things. Ever. 😉

Here’s it’s Cinderella story:

A while back I was browsing my local thrift store and I walked right into this:

It was really sad looking and practically begging for a makeover.

But the amount of potential was amazing. The shape. The legs. It had it going on!

Well, except for the color, bad paint job, horrible seat fabric and not to mention the fact that it was very wobbly. Nothing  a little TLC couldn’t fix, right? Because of it’s rough condition I was able to make a deal on it big time! $4.00… boo-ya!

In the car it went and I made my way home. My husband took one look at it, looked at me, then back to the chair and shook his head. He thinks I’m crazy, but he went ahead and sat in it… and wobble it did. Obviously it was going to need a little work.

With this being my first upholstery job, I was a bit hesitant about how I was going to reupholster the seat. But I found the best way to gain confidence was to start taking apart the current upholstery job.

By seeing how the original upholstery was done, I knew that I could replicate it on my own. Very easy!

Once I was down to the bare seat, I got busy working on the frame of the chair.

Because the chair had been repainted, and not very well at that, I gave the entire thing a heavy sanding and followed it with a hot soapy bath.

After that came a coat of primer.

My husband dropped in at this point and tightened all the loose screws and brackets and added a piece of wood to the bottom of the chair, between the two legs, for added support. Wobble be gone!

I gave the entire chair a couple coats of light gray spray paint and let it dry overnight.

The next day I was ready to tackle the upholstery.

I started with the foam for the seat.

For the seat, I simply took a piece of foam and traced the seat with a sharpie. Then I cut it out and used hot glue to attach it on the edges and corners.

I was hesitant using hot glue to attach the foam to the seat, but I figured that since I was going to be wrapping it with batting and fabric it would stay in place since the fabric would be wrapped tightly. Hopefully I’m right. 🙂

After the foam was glued to the seat, I started wrapping it with batting.

Using a staple gun, I pulled the batting tight and stapled it to the back of the seat.

After that was finished, I started with my fabric and used the same technique as the batting. I started wrapping the seat with fabric, pulling tight and stapling it to the back of the seat. It was much easier than I thought.

Before I knew it  the entire seat was covered.

And I was admiring the corners.

To attach it to the frame we used a few screws and placed them in the existing screw holes.

Just like that we had a finished chair!

These DIY projects are certainly becoming a favorite in our home! But why wouldn’t they when they turn out like this?

Big Smiles!